Pre-Install Information

Congratulations!  You’ve chosen BannerSaver, the world’s premier wind-spilling banner bracket. Before you being installation – familiarize yourself with the components of a BannerSaver kit, gather the additional tools needed for proper installation and ensure you’ve purchased the correct banding for your project.

STANDARD BANNERSAVER KIT

ADDITIONAL TOOLS REQUIRED FOR INSTALLATION

CONFIRM YOU HAVE CORRECT BANDING

Choosing the right banding is essential for correct BannerSaver installations.

Heavy banding is ideal for all installs, but is required when installing Large and XL BannerSaver brackets.  It is also recommended if you have the following situations: Tapered poles, Square Poles which are 4″ or greater on each side, 2 banners per pole, particularly high wind speeds

Standard banding works fine for most installations of Small or Medium BannerSaver brackets.

*More about Heavy vs. Standard Banding